Pandora Wiki - User contributions [en]

PPSSPP Compatibility List

2014-03-30T13:33:37Z

F Slim:

PPSSPP is a Sony PSP Emulator ported on Pandora by PtitSeb. Other versions exist [http://www.ppsspp.org/development.html#tasks (Linux|GNU, Android, Windows, Mac..)]

Current stable version is 0.9.6.34 from Jan 25th 2014. You can read a full article about this version on [http://pandoralive.info/?p=2764 Pandoralive]

==Adding to the Compatibility List==
Choose a playability color that reflects a game's best playability state. Also include the clockspeed at which you ran it, for whichever Pandora version you tested. Please also indicate in the name of the Game whether the version is US/EU/JP, since compatibility may differ depending on regions. You may also add specific conditions you specified in the settings if they differ from the defaults. As for the SGC driver, please write "default" if you did not change your driver vs what was in the firmware.

Don't post a redundant entry unless you are using a different Pandora model and the playability differs from an existing entry. If a game's playability gets worse (new bugs, new crashes) in a new PPSSPP version, update the entry and add that to notes.

{|class="wikitable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: left;"
|- style="background: #ececec; text-align: center;"
!Playability
!Description
|- style="background: #90FF90"
|Fullspeed
|Games with a '''green''' background run at fullspeed and are fully playable from start to finish. If frameskip is required, add to notes.
|- style="background: #F3F781"
|Playable
|Games with a '''yellow''' background run slower than fullspeed, but are otherwise fully playable. Add problems/slowdowns to notes.
|- style="background: #F7BE81"
|Incomplete
|Games with an '''orange''' background have playability issues and cannot be played from start to finish. This may include missing functionality (wifi) or game crashes. Add problems to notes.
|- style="background: #F78181"
|Unplayable
|Games with a '''red''' background are unplayable. They either don't run at all, or don't get past the intro. Add any other oddities to notes.
|-
|N/A
|Games with a '''white''' background have not been fully tested. If you see one on this list, try it out and report back!
|}
If you are inclined, post your forum username at the end of your notes so you can be contacted by PtitSeb about further debugging your problems.

==The Compatibility List==


You can sort the columns by clicking the table header (javascript required).

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Game Name and Region
! PPSSPP Version
! Pandora Model<sup>[1]</sup>
! SGX driver
! SZ version

! Frequency
! Notes on Settings
! Status

|- style="background: #F78181"
|Taiko no Tatsujin Portable 2 (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Makes the emulator completely crash right after the first few screens. Back to desktop.
|Red

|- style="background: #90FF90"
|Final Fantasy III (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Fullspeed in most places except in villages where the game slows down a bit while remaining playable.
|Green

|- style="background: #90FF90"
|Final Fantasy III (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Fullspeed in most places except in villages where the game slows down a bit while remaining playable.
|Green

|- style="background: #90FF90"
|Star Ocean: The Second Departure (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Fullspeed apparently at all times, with minor glitches on text boxes once in a while.
|Green

|- style="background: #F3F781"
|Tales of Rebirth (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Major glitches on screen (sprites tend to disappear) and some music stutters in fight scenes.
|Yellow

|- style="background: #F3F781"
|Tales of Rebirth (JP)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Glitches on screen are now gone but combat scenes are slow and some music stutters in fight scenes. But it's playable.
|Yellow

|- style="background: #F3F781"
|Tekken Dark Resurrection (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Works fine but very slow in game. It's somehow playable if you enjoy 5fps frame rate, and music stuttering.
|Yellow

|- style="background: #90FF90"
|Hatsune Miku, Project Diva (JP)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Fullspeed while frameskip is on. Not always super smooth but very, very playable. No big difference vs 0.9.6.34.
|Green

|- style="background: #90FF90"
|Hatsune Miku, Project Diva (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Fullspeed while frameskip is on. Not always super smooth but very, very playable. Smoother than in previous builds.
|Green

|- style="background: #90FF90"
|Hatsune Miku, Project Diva (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Fullspeed while frameskip is on. Not always super smooth but very, very playable.
|Green

|- style="background: #90FF90"
|Metal Slug Anthology (US)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Fullspeed in-game but sometimes slow in the menus and when loading from one level to another. This being said, I recommend playing such games on the Neo Geo emulators, instead.
|Green

|- style="background: #F3F781"
|Guilty Gear XX (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Just like BlazBlue, slow in game, while playable. But not enjoyable for a fighting game, basically.
|Yellow

|- style="background: #F3F781"
|Street Fighter Alpha 3 Max (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Works full speed with no sound stuttering, but the frameskip needed to achieve that makes it suboptimal for playing effectively (ie frames dropping impact playability).
|Yellow

|- style="background: #90FF90"
|Megaman Powerup (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|It now feels full speed with frameskip, and the music does not seem to stutter much anymore. This being said, it drops frames depending on the complexity of what's going on on the screen, and sometimes impacts gameplay.
|Green

|- style="background: #F3F781"
|Megaman Powerup (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Not too far from full speed with frameskip, but there are frequent slow downs in game. It's playable but it's tough to shoot while jumping when the game slows down.
|Yellow

|- style="background: #F3F781"
|Megaman Powerup (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Not too far from full speed with frameskip, but there are frequent slow downs in game. It's playable but it's tough to shoot while jumping when the game slows down.
|Yellow

|- style="background: #F3F781"
|PixelJunk Monsters (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|2D game but running slowly, but better than in 0.9.1.31. Sound stutters less and it's playable.
|Yellow

|- style="background: #90FF90"
|PixelJunk Monsters (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Running full speed most of the time with occasional stutter.
|Green

|- style="background: #90FF90"
|PixelJunk Monsters (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Running full speed.
|Green

|- style="background: #F3F781"
|PixelJunk Monsters (US)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|2D game but running slowly. Sound stuttering and gameplay slows down when many enemies are on screen.
|Yellow

|- style="background: #F3F781"
|Tales of Eternia (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|2D, running sometimes full speed, sometimes very slowly (with sound stuttering). Alpha hack helps but does not make it perfect either.
|Yellow

|- style="background: #F3F781"
|Tales of Eternia (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|2D, running sometimes full speed, sometimes very slowly (with sound stuttering). Alpha hack helps but does not make it perfect either.
|Yellow

|- style="background: #F3F781"
|To Heart 2 (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|2D game only but running slowly when text is overlaid on background graphics. It makes the music stutter, but it remains playable (since it's a visual novel).
|Yellow

|- style="background: #90FF90"
|To Heart 2 (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Now Full Speed in latest version.
|Green

|- style="background: #90FF90"
|Tactics Ogre (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Full Speed most of the time, with frameskip. Japanese Text is significantly buggy, Unable to follow dialogue.
|Green

|- style="background: #90FF90"
|Tactics Ogre (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Full Speed most of the time, with frameskip, while the card selection screen at beginning of the game is glitchy. Japanese Text is significantly buggy, Unable to follow dialogue.
|Green

|- style="background: #90FF90"
|Tactics Ogre (JP)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Full Speed most of the time, with frameskip, while the card selection screen at beginning of the game is glitchy.
|Green

|- style="background: #90FF90"
|Mirai Nikki (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Full Speed, perfect.
|Green

|- style="background: #90FF90"
|Lumines (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Frameskip is on but otherwise it runs fullspeed and without issues.
|Green

|- style="background: #90FF90"
|Lumines (EU)
|0.9.6.34
|1GHz
|4.10.00
|1.60
|1000 Mhz
|AutoFrameskip is on, AlphaHack is on, and Timer Hack is OFF. It runs fullspeed and without issues.
|Green

|- style="background: #F3F781"
|Lumines 2 (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Quite slow compared to Lumines 1, and the music keeps stuttering. Playable but not great...
|Yellow

|- style="background: #F3F781"
|Lumines 2 (US)
|0.9.5.35
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Quite slow compared to Lumines 1, and the music keeps stuttering. Playable but not great. A little faster than in 0.9.1.30.
|Yellow

|- style="background: #F3F781"
|Lumines 2 (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Quite slow compared to Lumines 1, and the music stutters. Playable.
|Yellow

|- style="background: #F3F781"
|Criminal Girls (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Very slow even though it's pure 2D. But playable, if you don't mind stuttering music and waiting a long time between dialogs...
|Yellow

|- style="background: #F3F781"
|Criminal Girls (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Not playing very smoothly, but at least very close to full speed most of the time (compared to 0.9.1.31). Sound stutters sometimes in dialogs but not always.
|Yellow

|- style="background: #F3F781"
|Criminal Girls (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Not playing very smoothly, scrolling is clearly not smooth. Sound stutters sometimes in most dialogs but not always. Alpha hacks works well to speed things up but introduces many glitches.
|Yellow

|- style="background: #90FF90"
|Lunar Silver Star Harmony (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs almost perfectly, with just a little bit of sound stuttering here and there, but very minor. Otherwise, full speed.
|Green

|- style="background: #90FF90"
|Lunar Silver Star Harmony (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Runs almost perfectly, with just a little bit of sound stuttering here and there, but very minor. Otherwise, full speed.
|Green

|- style="background: #90FF90"
|Lunar Silver Star Harmony (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Runs perfectly now, no more sound stuttering if you activate the alpha hack. Superb.
|Green

|- style="background: #F3F781"
|Y's Seven (JP)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs almost well, but there are several slow-downs during dialogs and the music tends to stutter. Playable, but needs a little more speed to be really great.
|Yellow

|- style="background: #90FF90"
|Archer Maclean's Mercury (EU)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Runs full speed most of time, except in the menu scroll appearing when finishing each level. But that has no impact on the performance in game itself.
|Green

|- style="background: #90FF90"
|Princess Crown (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Has some minor sound stuttering when loading cutscenes, but otherwise plays very well and feels full speed.
|Green

|- style="background: #90FF90"
|Star Ocean: The First Departure (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Working almost perfectly. The only issue is that the videos are distorted and you can only see a small portion of them (as if it was zoomed). The rest of the game works fine.
|Green

|- style="background: #F7BE81"
|Burnout Legends (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|The car's textures appear to be missing and most of the car exterior appears as white... and in-game, it's a little bit too slow to be playable.
|Orange

|- style="background: #F7BE81"
|Colin Mc Rally 2005 (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Slideshow, too slow to be playable.
|Orange

|- style="background: #F7BE81"
|Star Ocean: The First Departure (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Videos are fixed but the characters are invisible in-game. Therefore, broken vs the previous PPSSPP version...
|Orange

|- style="background: #F7BE81"
|Star Ocean: The First Departure (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|The characters remain visible in-game through buildings. Therefore, still broken.
|Orange

|- style="background: #F7BE81"
|Star Ocean: The First Departure (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|The characters remain visible in-game through buildings. Therefore, still broken.
|Orange

|- style="background: #F7BE81"
|GTA Chinatown (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Many issues in game: menus not displayed, visual artifacts, and framerate dropping significantly in the city. Unplayable at this stage.
|Orange

|- style="background: #F7BE81"
|GTA Chinatown (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Many issues in game: menus not displayed, black screens, visual artifacts, non-visible objects. Unplayable at this stage and worse than before.
|Orange

|- style="background: #F7BE81"
|Fat Princess (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Runs like a slideshow at this stage. Very very slow. Unplayable.
|Orange

|- style="background: #F7BE81"
|Fat Princess (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Runs very slowly with heavy music stuttering. Unplayable but faster than in 0.9.5.32
|Orange

|- style="background: #F7BE81"
|FIFA 2013 (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|You can reach the menu but after a few selections you end up on a black screen...
|Orange

|- style="background: #F7BE81"
|Persona 2 (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Extremely slow - slideshow. Very, very different from Persona 3. Unplayable.
|Orange

|- style="background: #F7BE81"
|Persona 2 (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Extremely slow - slideshow, and screen is very dark for some reason. Very, very different from Persona 3. Unplayable.
|Orange

|- style="background: #F7BE81"
|Persona 2 (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Extremely slow - slideshow, and screen is very dark for some reason. Very, very different from Persona 3. Unplayable.
|Orange

|- style="background: #F3F781"
|BlazBlue Continuum Shift (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Movies play perfectly, but the game is a bit slow during the fights. Very playable otherwise.
|Yellow

|- style="background: #F3F781"
|BlazBlue Continuum Shift (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Movies play perfectly, and the game is now running almost full speed, but the music stutters constantly. Not bad, good progress.
|Yellow

|- style="background: #90FF90"
|BlazBlue Continuum Shift (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Movies play perfectly, and the game is now running full speed, with almost no music stutters. Very close to being great to play.
|Green

|- style="background: #F3F781"
|Final Fantasy Tactics(US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Slow but kind of acceptable, but it really slows down a lot when there are specific effects on screen (thunder, magic). Music stutters constantly. Videos issues as well, just like all other games.
|Yellow

|- style="background: #90FF90"
|Final Fantasy Tactics(US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Still kind of slow, but much more playable than in the previous version. Music does not stutter much anymore and special effects do not slow down the game as much as before.
|Green

|- style="background: #90FF90"
|Final Fantasy Tactics(US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Still kind of slow at times, but music does not stutter much anymore and special effects do not slow down the game as much as before.
|Green

|- style="background: #90FF90"
|The Legend Of Heroes - Trails In The Sky (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs very, very well. Some occasional slow-downs but otherwise very much full speed and smooth. Amazing! (Apart from video issues)
|Green

|- style="background: #90FF90"
|The Legend Of Heroes - Trails In The Sky (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Runs very, very well. Some occasional slow-downs but otherwise very much full speed and smooth. Amazing!
|Green

|- style="background: #90FF90"
|The Legend Of Heroes - Trails In The Sky (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Runs very, very well. Some occasional slow-downs but otherwise very much full speed. Amazing! (Apart from video issues)
|Green

|- style="background: #F3F781"
|Akiba's Trip (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Sometimes running very close to full speed, but some other times slowing down, hence yellow. But still, quite playable. Sound stutters often, though.
|Yellow

|- style="background: #F7BE81"
|Akiba's Trip (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|For some unknown reason it has become very slow in 0.9.5.32, and is very much a slideshow now, making it unplayable in fight scenes.
|Orange

|- style="background: #F3F781"
|Akiba's Trip (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Sometimes running very close to full speed, but some other times slowing down, especiall during fights, hence yellow. But still, quite playable, and sound does not stutter much anymore.
|Yellow

|- style="background: #90FF90"
|Castlevania Chronicles (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs very much full speed but some cutscenes need to be skipped (somehow they get stuck...). Note that there is still stuttering sound and buffering effect in the videos, as usual.
|Green

|- style="background: #90FF90"
|Castlevania Chronicles (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Runs very much full speed, while there are still slow downs in videos. Cutscenes now work fine.
|Green

|- style="background: #90FF90"
|Castlevania Chronicles (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Runs very much full speed, and no slow downs in videos anymore. Excellent.
|Green

|- style="background: #90FF90"
|Queen's Blade Spiral Chaos (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs full speed. No issue in game.
|Green

|- style="background: #F3F781"
|Kingdom Hearts: Birth by Sleep (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos stop at some times and need to "buffer" apparently once in a while. Sound stutters often. 3D is quite slow in game and sound keeps stuttering. PLayable but not enjoyable at this stage.
|Yellow

|- style="background: #F3F781"
|Kingdom Hearts: Birth by Sleep (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Videos stop at some times and need to "buffer" apparently once in a while. 3D is faster in game than in 0.9.1.30 but far from smooth. Playable, but barely.
|Yellow

|- style="background: #F3F781"
|Mana Khemia Student Alliance (EU)
|0.9.1.30
|Rebirth
|XXX
|1.55
|950 Mhz
|Sometimes a bit slow, slows down when a dialog window appears, but very playable.
|Yellow

|- style="background: #F3F781"
|Shining Ark (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1100 Mhz
|Sound stutters heavily in videos and the video appears to "buffer" several times in each sequence. 3D is OK in game, a little slow but very playable. At 1100 Mhz the sound stutters a little less. Playable.
|Yellow

|- style="background: #F7BE81"
|Shining Ark (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1100 Mhz
|Textures are broken in the intro (not transparent tree leaves), and in-game has become very very slow. Unplayable now.
|Orange

|- style="background: #F7BE81"
|WipeOut Pure (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Sound stutters heavily in videos and the video appears to "buffer" several times in each sequence. 3D is extremely slow in game, making it unplayable. There are visual artefacts on default settings (kind of blurry effects on screen)
|Orange

|- style="background: #F7BE81"
|WipeOut Pure (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Sound stutters heavily in videos and the video appears to "buffer" several times in each sequence. 3D is extremely slow in game, making it unplayable. Less visual problems than before but still a slideshow at best.
|Orange

|- style="background: #F3F781"
|WipeOut Pure (EU)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|3D is slow in game, yet much faster than in previous builds. Maybe we get something like 5fps now and the game can somehow be played.
|Yellow

|- style="background: #F3F781"
|WipeOut Pure (EU)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|3D is slow in game, yet much faster than in previous builds. Maybe we get something like 5fps now and the game can somehow be played.
|Yellow

|- style="background: #F7BE81"
|Need for Speed Carbon (US)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|A Slideshow fest. Unplayable.
|Orange

|- style="background: #F7BE81"
|Need for Speed Rivals (US)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|It does not even run at 1 FPS in-game. Shockingly slow. Of course, unplayable.
|Orange

|- style="background: #F7BE81"
|Colin Mc Rae 2005 (EU)
|0.9.1.31
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Very slow in game. Slideshow. Unplayable.
|Orange

|- style="background: #F7BE81"
|Colin Mc Rae 2005 (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Very slow in game. Slideshow. Unplayable.
|Orange

|- style="background: #F7BE81"
|Colin Mc Rae 2005 (EU)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Very slow in game. Slideshow. Unplayable.
|Orange

|- style="background: #F7BE81"
|Lego Batman (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Sound stutters heavily in videos and the video appears to "buffer" several times in each sequence. 3D is extremely slow in game, making it unplayable. Some menus do not seem to display well and there is flickering at some points as well.
|Orange

|- style="background: #F7BE81"
|Lego Batman (EU)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Cutscenes now work much faster than before, however 3D is extremely slow in game, making it unplayable.
|Orange

|- style="background: #F7BE81"
|Lego Batman (EU)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|3D is extremely slow in game, making it unplayable.
|Orange

|- style="background: #F3F781"
|Half Minute Hero (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Game is definitely full speed but there are some visual artifacts now and then. Otherwise fully playable.
|Yellow

|- style="background: #90FF90"
|Half Minute Hero (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Game is definitely full speed and visual artifacts seem to be gone.
|Green

|- style="background: #90FF90"
|Half Minute Hero (EU)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Game is definitely full speed (put alpha hack ON, if not it won't be full speed and sound will be stuttering).
|Green

|- style="background: #90FF90"
|Valkyria Chronicles 2 (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos have sound stuttering as for most videos in 0.9.1.30 version, but other than that the game is very much full speed and runs very well, with the occasional sound stuttering but overall I consider this one green.
|Green

|- style="background: #F78181"
|Persona 3 Portable (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos work fine, but when entering in the game the screen remains black in most scenes, while one can hear the background sound. Because of that, the game is unplayable. Too bad.
|Red

|- style="background: #90FF90"
|Persona 3 Portable (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Surprisingly works great in this new version. Full speed, videos run perfectly. Superb!
|Green

|- style="background: #90FF90"
|Persona 3 Portable (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Works great in this new version. Full speed, videos run perfectly. Superb!
|Green

|- style="background: #90FF90"
|Corpse Party (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Works great. Full speed, videos have sometimes a little stutter. Otherwise, superb!
|Green

|- style="background: #F78181"
|Valkyrie Profile (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Black screen when launching the game. Some sound can be heard but nothing happens. Unplayable.
|Red

|- style="background: #F78181"
|Valkyrie Profile (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Black screen when launching the game. Some sound can be heard but nothing happens. Unplayable.
|Red

|- style="background: #F78181"
|Little Big Planet (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Message when starting: cannot install data locally (data is corrupt) therefore the game refuses to start.
|Red

|- style="background: #F78181"
|Sakura Taisen 1&2 (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos don't show up correctly, and drawings in the game suffer from super glitches making the screen unreadable. Unplayable.
|Red

|- style="background: #F78181"
|Sakura Taisen 1&2 (JP)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Videos don't show up at all, some graphic glitches are fixed but background are still invisible/not rendered properly. Plus, very slow and stuttering. Unplayable.
|Red

|- style="background: #F78181"
|Sakura Taisen 1&2 (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Videos don't show up at all, some graphic glitches are fixed but background are still invisible/not rendered properly. Unplayable and somehow worse than in previous version in terms of rendering.
|Red

|- style="background: #F7BE81"
|Jeanne d'Arc (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos stutter a lot and the buffering effect is still noticeable. More problematic, the game is very slow and the characters sprites do not display at all in the game (only their shadows).
|Orange

|- style="background: #F7BE81"
|Jeanne d'Arc (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Videos now work relatively fine. However the game is still very slow and the characters sprites do not display at all in the game (only their shadows).
|Orange

|- style="background: #F7BE81"
|Jeanne d'Arc (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Videos now work fine. However the game is still very slow and the characters sprites/3d figures do not display at all in the game (only their shadows). Still the same as before.
|Orange

|- style="background: #F7BE81"
|Jeanne d'Arc (US)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Videos work fine, however the game is very slow and the characters' 3d figures do not display at all in the game (only their shadows). Still the same as before.
|Orange

|- style="background: #F3F781"
|Ridge Racer 2 (US)
|0.9.1.30
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Works fine, Need Frameskip to 5 and no Framebuffer (no Mipmap also). Gameplay Speed is between 85% and 100%.
|Yellow

|- style="background: #90FF90"
|Ridge Racer 2 (US)
|0.9.6.34
|1GHz
|4.10.00
|1.60
|1000 Mhz
|Works fine, Need AutoFrameskip and Framebuffer Rendering (no Mipmap also). Gameplay Speed is between 85% and 100%, with 100% most of the time.
|Green

|- style="background: #F3F781"
|Velocity (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Works fine and seemingly fullspeed, but the music keeps stuttering.
|Yellow

|- style="background: #90FF90"
|Valkyria Chronicles 3 (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos have sound stuttering as for most videos in 0.9.1.30 version, but other than that the game is very much full speed and runs very well, with the occasional sound stuttering but overall I consider this one green.
|Green

|- style="background: #90FF90"
|Valkyria Chronicles 3 (JP)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Videos now run close to perfect, and the game running almost full speed with the occasional sound stuttering but overall I consider this one green.
|Green

|- style="background: #90FF90"
|Valkyria Chronicles 3 (JP)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Videos now run close to perfect, and the game running almost full speed with the occasional sound stuttering but overall I consider this one green.
|Green

|- style="background: #90FF90"
|Clannad (JP)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Runs perfectly. It's kind of expected since it's a visual novel, but still, music plays fine too.
|Green

|- style="background: #F3F781"
|Patapon 3 (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Videos stop at some times and need to "buffer" apparently once in a while (but do not stutter for sound). Game is a bit slow and sound keeps stuttering. Playable but not enjoyable at this stage.
|Yellow

|- style="background: #F3F781"
|Patapon 3 (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Videos play perfectly now. Game is a bit slow and sound only stutters when the scene is complex now. Playable but not enjoyable at this stage.
|Yellow

|- style="background: #F3F781"
|Loco Roco 2 (EU)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Using simple bezier curves for speedup in Settings. Game is a bit slow when there are lots of elements on screen and it makes the sound stutter. Otherwise playable.
|Yellow

|- style="background: #F3F781"
|Loco Roco 2 (EU)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Using simple bezier curves for speedup in Settings. Game is a bit slow when there are lots of elements, making sound stutter, but it is faster than in 0.9.1.30. Playable.
|Yellow

|- style="background: #F3F781"
|Loco Roco 2 (EU)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Using simple bezier curves for speedup in Settings. Game is a bit slow when there are lots of elements, but most of the time it runs very well and the music only stutters rarely. Very Playable now. Note some black screens in videos or cutscenes remain, while they don't affect the gameplay. Otherwise it would be green.
|Yellow

|- style="background: #F3F781"
|Loco Roco 2 (EU)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Using simple bezier curves for speedup in Settings. Game is a bit slow when there are lots of elements, but most of the time it runs very well and full speed. Music only stutters rarely now. Very Playable. Note some black screens in videos or cutscenes remain, while they don't affect the gameplay. Otherwise it would be green.
|Yellow

|- style="background: #F3F781"
|Disgaea (US)
|0.9.1.30
|1GHz
|4.03.02
|1.54
|1000 Mhz
|Game is very slow and the sound keeps stuttering. Otherwise it seems to work...
|Yellow

|- style="background: #90FF90"
|Disgaea (US)
|0.9.5.32
|1GHz
|4.03.02
|1.55
|1000 Mhz
|Game is slow only in the intro sequence, and runs full speed afterward. Excellent.
|Green

|- style="background: #90FF90"
|Disgaea (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Game is slow only in the intro sequence, and runs full speed afterward. Excellent.
|Green

|- style="background: #90FF90"
|Disgaea 2 (US)
|0.9.6.34
|1GHz
|4.03.02
|1.60
|1000 Mhz
|Game runs fullspeed (it is obviously dropping frames but it's not bad at all).
|Green

|- style="background: #F3F781"
|Radiant Mythology
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| most of the time fullspeed with a few drops in speed here and there, imo very playable.
|yellow

|- style="background: #90FF90"
|S.W.A.T.
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
|Seems almost perfect so far.
|Green

|- style="background: #F7BE81"
|Dead to Rights
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
|Looks good and soo close to being playable(maybe next update)
|Orange

|- style="background: #F7BE81"
|Little Big Planet
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| looks good but again too slow to be playable
|Orange

|- style="background: #F7BE81"
|Riviera the Promised Land
|0.9.5.32
|1 Ghz
|4.03.02
|1.55
|1000 Mhz
|Crashes right in the middle of the first fight.
|Orange

|- style="background: #F7BE81"
|Riviera the Promised Land
|0.9.6.34
|1 Ghz
|4.03.02
|1.60
|1000 Mhz
|Crashes right in the middle of the first fight.
|Orange

|- style="background: #F7BE81"
|F.F. Crisis Core
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| looks good but too slow
|Orange

|- style="background: #F7BE81"
|007 To Russia With Love
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| looks very good but slow
|Orange

|- style="background: #F7BE81"
|Socom 3
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| Looks good but too slow
|Orange

|- style="background: #F7BE81"
|Ghost Recon
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| sometimes full speed with slowdowns when things get busy also some very weird graphics glitch, not quite playable but almost (maybe next update)
|Orange

|- style="background: #F7BE81"
|Metal Gear Portable ops
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| looks good but too slow
|Orange

|- style="background: #F7BE81"
|Star Wars Battlefront 2
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| too slow and some graphic glitches
|Orange

|- style="background: #F78181"
|N.O.V.A.
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
|crashes right away
|Red

|- style="background: #F78181"
|Resistance - Retribution
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
|crashes
|Red

|- style="background: #F3F781"
|Final Fantasy 4 the After years
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| a few glitches, sometimes full speed , somewhat playable imo
|yellow

|- style="background: #F78181"
|3rd Birthday
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
|looks good but too slow
|Red

|- style="background: #F7BE81"
|Soul Calibur
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| looks good but too slow
|Orange

|- style="background: #F7BE81"
|Rachet and Clank - Size matters
|0.9.5.32
|rebirth
|4.03.02
|1.55
|950 Mhz
| Works but too slow and has some glitches/fall back to software rendering
|Orange

|- style="background: #F3F781"
|Earth Defense Force 2 Portable (J)
|0.9.7.35
|1GHz
|4.03.02
|1.60
|1300 Mhz
|Although the game is emulated practically flawlessly, it suffers from MASSIVE slowdown, and I do mean it - it's worse than Wipeout Pure. It rarely exceeds 3 FPS on 1.3 GHz and speedup hacks and frameskipping make no difference.
|Yellow

|- style="background: #90FF90"
|Tokobots (USA)
|0.9.8
|1GHz
|4.03.02
|1.60
|1600 Mhz
| The game plays at max frames and suffers no slowdown. Only issue is that the faces of enemies are not visible.
| Green

|- style="background: #F78181"
|Test Drive Unlimited
|0.9.8.36
|1GHz
|4.03.02 & 4.10
|1.60
|1000 Mhz
|Screen stays black, after pressing (X) videos play fine, but menu does not show on screen (menu music plays fine, too, showing ~8.0 FPS)
|Red

USB compatibility list

2012-04-24T21:21:25Z

F Slim: /* External Hard Disk Drives */

This is a list of USB devices that have been tested on the Pandora. If the device you want to know about isn't listed here, don't worry! Just go to [[USB_reference|the USB reference page]], look up the specs of your device, and you may be able to figure out if it's compatible.

= Networking =

Please see the [[Mobile broadband]] page for tips on how to get these working, as well as [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/ this tutorial] from the GP32X forum.

== HSDPA (3G) Modems ==

Please note that many (if not all) USB 3G modems need modemmanager to be installed for switching from mass storage mode to serial communications mode. When first plugged in, most 3G USB modems claim to be a mass storage device and offer, on its built-in flash, drivers and connectivity software to be installed. Mostly this is only for Windows and Mac, so for the Pandora this is not useful. modemmanager instantly takes care of toggling the mode, so that when you plug in the modem, after a few seconds or maybe half a minute modemmanager has switched the modem to communications mode and NetworkManager is able to use it.

If you are using a Firmware before HF7 (or one of its Alpha/Beta versions) you have to install modemmanager. To do so, connect your Pandora to the Internet, open a terminal and, as a super user, intall it via opkg by entering the commands:

:sudo opkg update
:sudo opkg install modemmanager

'''Note:''' If you are using a firmware more recent than "Zaxxon" Hotfix 6 (starting with HF7) you do not have to follow the steps outlined above since modemmanager comes preinstalled.

'''Note 2:''' After plugging in the USB 3G modem, it may take some time until NetworkManager is able to use the modem. Wait for at least half a minute, until you give up and report that the modem doesn't work.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| ZTE K3565-Z / MF626 / MF627 / MF636
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__956513] [http://boards.openpandora.org/index.php?/topic/7226-superzaxxon-beta-11-released/page__pid__127881#entry127881]}}
| A how-to by shideneyu for this modem can be found [http://www.pandorawiki.org/ZTE_K3565Z_3G_USB_Modem here]
|-
|-
| BandLuxe C270
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| A how-to by relliker for this modem can be found [http://www.pandorawiki.org/BandLuxe_C270_3G_USB_Modem here]
|-
| Huawei E156G
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/52827-3gumts-usb-dongle/page__view__findpost__p__835681]}}
|
|-
| Huawei E160
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong. This one definitely needs modemmanager. After installing modemmanager, it works flawlessly.
|-
| Huawei E160E
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| As the entry for Huawei E220 was wrong, this Current draw could also be wrong.
|-
| Huawei E1750
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__939350]}}
|
|-
| [[wikipedia:Huawei E220|Huawei E220]]
| Not required
| Standard-A
| USB 1.1
| 500mA
| Standard-A port via High Speed hub
| {{No|Not on new kernels.}}
| The successful Pandora E220 tests were done by DJWillis on an old kernel (long before Pandora shipped). It seems that they are NOT working any more. Also tested on Linux (was it working?) This entry originally said 250mA, but there is no source and current sources say 500mA.
|-
| 4G-Systems XS Stick P14
| Not required (usbserial module)
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/54318-guide-mobile-broadband-usb-stick-usage/page__view__findpost__p__937681]}}
| Requires usbmodeswitch program.
|-
| iPhone 3GS (Probably also 1G/3G)
| ipheth
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Maybe|Should work in Angstrom with some work.}}
| Requires a good bit of dependencies to get working. Tested with Debian from SD, but should work in Angstrom with some work. The ipheth wwan0 device only provides a connection over the 3G modem, even if you're connected to a wifi network. I used the iproxy and SSH tunneling method with proxychains to get to the wifi network.
|-
| HTC Desire
| not required
| Standard-A
| USB 2.0
| 500mA
| {{Unknown|USB A (Standard-A port?)}}
| {{Yes}}
| Requires internet connection sharing to be enabled from the phone.
|}

== USB to Ethernet adapters ==

To enable USB Ethernet adapters on the Pandora, you may need to left-click the networking icon on the panel in Xfce, and select "Ifupdown (bnep0)".

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Apple USB Ethernet Adapter MB442Z/A
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Reportedly uses an ASIX AX88xxx chipset.
|-
| Apple USB Ethernet Adapter model A1277
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 05ac:1402 Apple, Inc.
|-
| Conrad 3-Port-USB-Hub und Netzwerk-Adapter
| Not required
| Standard-A
| USB 2.0
| A lot! {{HideableNotes|50% of battery charge only brings you 2h40min (min brightness, no other devices attached)}}
| Standard-A port
| {{Yes}}
| Has a 3port USB Hub included. External power supply can (and should) be attached, not included though. ASIX Chipset. 20€ @ [http://www.conrad.de/ce/de/product/976406/NOTEBOOK-MINI-DOCKINGSTATION-USBRJ45/SHOP_AREA_32315&promotionareaSearchDetail=005 Conrad Electronics]. Not tested in Linux.
|-
| Wii USB 2.0 10/100M adapter (use [http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=86;71;101 ASIX AX 88772 USB 2.0 chip])
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772. [http://www.dealextreme.com/details.dx/sku.5926 This clone from DealExtreme] works too.
|-
| Connectland USB 2.0 10/100M Ethernet Adapter
| Not required
| Standard-A
| USB 2.0
| 250mA
| Standard-A port
| {{Yes}}
| ID 0b95:7720 ASIX Electronics Corp. AX88772 - Works fine, Sometimes a reboot is necessary (ZaxxonHF5RC1).
|-
| Belkin Gigabit USB 2.0 Network Adapter
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| The shape of it make is a bit awkward to fit if you connect it directly, but it has a short adapter cable. I only get ~95Mbit on a gigabit network, but then the pandora's cpu maxes out. (it may be that the driver/usb stack isn't very well optimized), has horribly bright blue LEDs.
|-
| MosChip MCS7830 USB 10/100 Ethernet adapter
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Kernel module: mcs7830.
|-
| EU.MARK USB 10/100M RJ45 Ethernet Network Adapter Dongle
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| USB ID: 9710:7830 - bought from [http://www.dealextreme.com/details.dx/sku.22684 DealExtreme]
|-
| Digitus DN-10050 Fast Ethernet USB Adapter
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| MosChip MCS7830-based adapter. USB ID 9710:7830.
|-
| Edimax EU-4230 Fast Ethernet USB Adapter with 3-port USB hub [http://edimax.ie/images/Image/datasheet/USB/EU-4230/EU-4230_Datasheet.pdf]
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Ethernet USB ID 0b95:772a ASIX Electronics Corp. 3-port USB2.0 hub USB ID 0409:005a NEC Corp. Optional power adapter for USB hub.
|-
| Peabird USB v2.0 Fast Ethernet Adapter
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Yes}}
| ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps Ethernet adapter. Consumes a lot of current. Fragile, the protective plastic cord cracked after one month. Hot. A blue light a bit too flashy. Definitely avoid this model.
|-
| SIIG JU-NE0012-S1 USB 2.0 Fast Ethernet Adapter
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{Yes}}
| Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16812191163 Newegg]
|}

== USB WiFi adapters ==

The Pandora stock kernel doesn't seem to come with any wireless driver support outside of the internal WiFi chip. The only way you'll get wireless working is to build your own kernel with it included or try [http://wireless.kernel.org/en/users/Download compat-wireless].

As for hofix 6a4 compat-wireless seems to be present in the kernel out of the box, so one can build a USB wireless driver for Pandora following this [http://boards.openpandora.org/index.php?/topic/5140-solvedbuilding-a-usb-wifi-driver/page__view__findpost__p__89280 algorithm]

As for [[hotfix 6]] Release Candidate the kernel includes drivers for these Realtek chips: RTL8712/8188/8191/8192SU/8192CU

See also [http://boards.openpandora.org/index.php?/topic/7160-micro-wifi-dongle/ this thread] on the forums for the latest.

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Tested on Pandora
! Additional comments
|-
| Advance Mini Wireless N150
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| There's a little hole on it, so it's useful for attaching it to the OP.
|-
| ASUS WL-167G v2
| rt73usb + rt2x00usb + rt2x00lib
| Standard-A
| USB 2.0
| 300mA
| USB A
| {{Yes|Nothing in lsusb, nothing in dmesg :(. Have to be plugged into a non-powered (or powered) USB hub. dmesg shows "failed to request firmware error". You just have to "cp /lib/firmware/rt73.bin /your/pandora-rootfs/lib/firmware/"}}
| 0b05:1723 ASUSTek Computer, Inc. WL-167G v2 802.11g Adapter [Ralink RT73]. Works pretty fine on Linux PC.
|-
| Belkin N1 Wireless USB Adapter (F5D8051) ("Ver. 2053") (MARVELL v1021)
| N/A
| Standard-A
| USB 2.0
| {{Unknown}}
| No connection was attempted.
| {{No|No native driver support and ndiswrapper obviously won't work.}}
| There's a previous revision of this dongle which is supposed to have a Ralink chip, but they revised it and put a different chip inside. Reported (by whom?) to work with ndiswrapper and works in Linux.
|-
| Belkin Surf micro
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Cisco/Linksys AE1000 High Performance Wireless-N USB Adapter
| rt3572sta (RT3572USB)
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A (Standard-A port?)
| {{Yes|Works with a modified driver.}}
| (Compiled module for pandora:[http://boards.openpandora.org/index.php?/topic/1992-linksys-ae1000-usb-wifi/ pandora forum]) Download the driver from [http://www.ralinktech.com/support.php?s=2 ralink's driver site], edit ./common/rtusb_dev_id.c, before "#endif // RT2870" add "{USB_DEVICE(0x13B1,0x002F)},", compile.' Reported (by whom?) to work in Linux.
|-
| D-Link WIRELESS G USB ADAPTER DWL-G122 rev.E1 F/W 5.00
| rt2870sta + rt2800usb + rt2800lib
| Standard-A
| USB 2.0
| 450mA
| USB A
| {{No|lsusb shows it, sometimes have to plug and reboot. No modules are loaded.}}
| 07d1:3c0f D-Link System AirPlus G DWL-G122 Wireless Adapter(rev.E) [Ralink RT2870]. Works pretty fine on Linux PC.
|-
| Digitus Wireless 150N USB 2.0 Adapter
| rtl8192cu
| Standard-A
| USB 2.0
| 500mA
| USB A
| {{Yes|Yes}}
| Bundled with a non-WiFi Pandora coming from Craig's shop
|-
| Edimax EW-7811Un
| rtl8192cus
| Standard-A
| USB 2.0
| unknown
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Netgear WNA1000M
| rtl8192cu
| Standard-A
| USB 2.0
| {{Unknown}}
| USB A
| {{Yes|Yes}}
| {{Yes|Should work out of the box since [[Hotfix 6]] Release Candidate}}
|-
| Thomson WLG-1500A
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|Doesn't work.}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter
|-
| TRENDnet TEW-424UB V2
| ?
| Standard-A
| USB 2.0
| 400mA
| USB A
| {{No|lsusb shows it, but no module is loaded}}
| 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter. Same behavior on a PC.
|}

= Storage =

== External Hard Disk Drives ==
{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! style="min-width: 120px" | Works on Pandora
! Additional comments
|-
| Freecom 250GB 2.5" portable
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Inside it's a Samsung Model HM251JX. {{HideableNotes|So I guess anything based on that will also work OK.}}
|-
| (Intenso)® 2.5" MEMORYSTATION 1TB
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
|
|-
| LaCie Rikiki 250GB USB 2.0 2.5" Hard Drive
| Not required
| standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port via powered High Speed Hub
| {{Partial|Not when unpowered, needs testing with a powered hub}}
| Not only does it fail to spin up, but it causes the Pandora's screen to pulsate wildly, much like an old CRT would if you placed a speaker or a magnet near to it. Not tested with a powered hub.
|-
| Seagate Seagate® Expansion™ External Drives
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{No}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14781-hitnrun/ Hitnrun]. "Isn't even detected in lsusb (drive powered by external power source)"
|-
| Verbatim 250GB Model #47580 Hard Drive
| Not required
| Direct
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877512 almatuk]. {{HideableNotes|"Watched videos directly from it at full speed, no need for powered USB hub. Had issues playing roms directly off it however as it was formatted NTFS. I'm sure if I formatted to FAT32 these would disappear."}}
|-
| Western Digital 160GB Elements External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| standard-A port via powered High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB Elements Portable USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or standard-A port via High Speed Hub
| {{Yes}}
|
|-
| Western Digital 250GB My Passport Essential USB 2.0 2.5" Hard Drive
| Not required
| {{Unknown|Direct?}}
| USB 2.0
| {{Unknown}}
| {{Unknown|Direct?}}
| {{Partial|Maybe}}
| Tested by TheDarkSpectrum48K. The first time it [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__877386 "works perfectly!"]. The second time [http://www.gp32x.com/board/index.php?/topic/54509-dont-use-lacie-25-usb-hard-disk-drives-with-a-pandora/page__view__findpost__p__882635 it didn't work].
|-
| Western Digital 400GB My Passport Essential USB 2.0 2.5" HDD model WDME4000TE
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://www.gp32x.com/board/index.php?/user/14534-peca/ Peca].
|-
| Western Digital 500GB Elements Portable External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. {{HideableNotes|The USB cable that came with it was bad, so I used another one.[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949863]}}
|-
| Western Digital 500GB My Passport Essential External Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works fine. {{HideableNotes|Came pre-formatted in NTFS, but should work if you downloaded the community codec pack. It said 1TB on the packaging, but there was 465GB free space, so I'm pretty sure it was actually the 500GB one.}}[http://www.gp32x.com/board/index.php?/topic/59494-solved-how-do-i-get-my-wd-500gb-external-hard-drive-to-work-properly/page__view__findpost__p__949645]
|-
| Western Digital 1TB My Passport Essential SE External USB 2.0 2.5" Hard Drive
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct or through powered High Speed Hub
| {{Yes}}
| Tested by [http://http://www.gp32x.com/board/index.php?/user/19191-mycohl/ Mycohl]. {{HideableNotes|Externally powered hub recommended to conserve battery power.}}
|-
| Western Digital Elements 2TB 3.5" Hard Drive Model:WDBAAU0020HBK
| Not Required
| Standard-A
| USB 2.0
| {{Unknown}}
| Direct
| {{Yes}}
| Tested by [http://boards.openpandora.org/index.php?/user/430-kilowatt/ kilowatt].
|}

== DVD/CD Drives ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Lite-On EZ-DUB DVD/CD Multi-Recorder (Model eZAU120)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter - DC 12V 1.8A
| Standard-A port
| {{No}}
| Works in Linux.
|-
| Memorex 20x Multi Format DVD Recorder External - DVD±RW (±R DL)
| Not required
| Standard-A
| USB 2.0
| Powered by included mains adapter
| Standard-A port
| {{Yes}}
|
|}

= Video display device =

== VGA DVI HDMI adapter ==

No devices have been tested yet

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
|
|
|
|
|
|
|
| No devices have been tested yet
|}

==== External graphic card ====

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Output connectors
! Works on Pandora
! Additional comments
|-
| Tritton see2 usb 2.0 to SVGA adapter
| sisusb
| USB
| USB 2.0
| {{Unknown|High {{HideableNotes|Reduces Pandora's battery life in half (10h → 4h)}}}}
| VGA (D-SUB)
| {{Partial|Yes, but has performance issues.}}
| Needs to be integrated with preferences. {{HideableNotes|Currently I must edit xorg.conf and mess with xinerama.}} Good for presentations, dragging a window is bearable, but hi-res video is slow. Works in Linux without any issues.
|}

= Video capture devices =

== Webcams ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Exoo No Driver/USB 2.0 Webcam (Model No.: M053)
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| Bought from [http://www.dealextreme.com/details.dx/sku.14991 DealExtreme]. Works in Linux.
|-
| Logitech Quickcam Communicate Deluxe
| Not required
| Standard-A
| USB 2.0
| {{Unknown}}
| Standard-A port
| {{No}}
| USB ID: 046d:0992, works though [http://linux-uvc.berlios.de/ uvcvideo]. Works in Linux.
|-
| Logitech HD Webcam C270 720p
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0825 Logitech, Inc. Audio recognized, but not tested. More info to come. Works in Linux.
|-
| Logitech HD Webcam Pro 9000
| Not required
| Standard-A
| USB 2.0
| 500mA
| Standard-A port
| {{Partial|Yes, but audio untested}}
| ID 046d:0990 Logitech, Inc. Audio recognized, but not tested. Great Picture! Works in Linux.
|}

= Audio devices =

== Microphones/recorders ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Zoom H2 Handy Recorder
| not required
| standard-A
| USB 1.1
| 300mA
| standard-A port via High Speed USB hub
| {{Yes|Yes, needs a USB hub.}}
| Can record into Audacity, but won't be recognized unless connected through USB hub.[http://www.gp32x.com/board/index.php?/topic/59301-audacity-1-3-12/page__view__findpost__p__947602].
|}

== MIDI controllers ==

EvilDragon bundled the usb MIDI class drivers in the default firmware image, therefore ANY class-compliant MIDI device should work with the Pandora, out of the box.[http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Akai LKP25
| Not required
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes [http://www.gp32x.com/board/index.php?/topic/58523-zynaddsubfx/page__view__findpost__p__938432]}}
|
|-
| M-Audio MIDISPORT 2x2 Anniv
| Not required
| {{Unknown}}
| {{Unknown}}
| 400mA
| {{Unknown}}
| {{Unknown}}
| ID 0763:1050 Midiman. High current draw!
|-
|}

== USB audio controllers ==

Aka. "professional soundcard"; see [http://en.wikipedia.org/wiki/Sound_card#Professional_soundcards_.28audio_interfaces.29 definition on Wikipedia].

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| Cakewalk UA-1G
| not required
| Standard-A
| USB 2.0
| 200mA
| Standard-A port
| {{No}}
| ID 0582:00e9 Roland Corp. This device may be similar to older Edirol/Roland USB audio devices. Widely reported (by whom?) to work in Linux.
|}

= Input devices =

Any HID ([http://en.wikipedia.org/wiki/Human_interface_device Human Interface Device]) compliant keyboard, mouse or game controller should work on the Pandora. Most of those device are low speed or full speed USB device and will need to be connected though either a USB OTG adapter/cable or a USB2 hub in order to work on the Pandora.

== External Game Controllers ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| 2-TECH SNES-to-USB adapter
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| USB description is "HuiJia USB GamePad", <tt>lsusb</tt> calls it "0e8f:3013 GreenAsia Inc."
|-
| USB Super RetroPort (SNES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=29 RetroZone]. Works in Linux.
|-
| USB RetroPort (NES-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| Bought from [http://www.retrousb.com/product_info.php?cPath=21&products_id=28 RetroZone]. Works in Linux.
|-
| Trio Linker Plus II (PlayStation,-GameCube,-and-Dreamcast-to-USB adapter)
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| Bought from [http://www.play-asia.com/paOS-13-71-6m-49-en-70-1zfv.html Play-Asia]. Works in Linux.
|-
| NAZAR V47 USB Force Feedback Vibrating Gamepad Controller for PC
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.24551 DealExtreme]. Works in Linux.
|-
| 10-Fire-Button Double Vibration Feedback USB PC Arcade Joystick
| Not required
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| Whether it really contains the claimed force feedback feature is unknown as this feature does not work under Linux - bought from [http://www.dealextreme.com/details.dx/sku.27821 DealExtreme]. Works in Linux.
|-
| Official PlayStation 3 controller
| Not required
| Standard-A
| Full speed
| {{Unknown}}
| USB A To Mini B Cable via High Speed Hub
| {{No}}
| This is for USB not bluetooth compatibility. Sixaxis and DualShock not tested. Works in Linux.
|-
| Thrustmaster Firestorm Digital 3 Gamepad
| Not required
| Standard-A
| Low speed
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| ID 07b5:0213 Mega World International, Ltd Thrustmaster Firestorm Digital 3 Gamepad.
|-
| Wired Xbox 360 Controller
| xpad module
| Standard-A
| {{Unknown|Probably USB 1.1}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{No}}
| This also includes gamepads for PC that needs the Windows Xinput driver. Such gamepads include the Logitech Chillstream. Works in Linux.
|-
| WiseGroup.,Ltd SmartJoy Dual PLUS Adapter (dual PSX to USB joypad adapter)
| {{Unknown}}
| Standard-A
| {{Unknown}}
| 100mA
| {{Unknown}}
| {{No}}
| ID 6677:8802. Works in Linux.
|}

== Touchpads ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Suggested connection to Pandora
! Works on Pandora
! Additional comments
|-
| [http://www.logitech.com/en-us/mice-pointers/mice/devices/8417 Logitech Wireless Touchpad]
| Not required
| Standard-A
| {{Unknown}}
| {{Unknown}}
| Standard-A port via High Speed Hub
| {{Yes}}
| Left and right four-finger swipes aren't mapped to anything by default in XFCE. They can be mapped as keyboard shortcuts.
|}

== Graphics tablets ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Driver
! Connector
! Supported standard
! Current draw
! Works on Pandora
! Additional comments
|-
| Bamboo Multitouch
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__881806]}}
| It's not known if this works in Linux.
|-
| Genius Tablet
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Yes|Yes, [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__883140 via USB hub]}}
| It's not known if this works in Linux.
|-
| Wacom CTH-460
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{Unknown}}
| {{No|No [http://www.gp32x.com/board/index.php?/topic/54728-pandora-owners-tried-tablet/page__view__findpost__p__924422]}}
| Would need a patched driver to work. It's not known if this works in Linux.
|-
| Wacom Volito2 Tablet (Model: CTF-420)
| Not required
| Standard-A
| Low speed
| 40mA [http://www.my-volito.com/volito/specs.asp?lang=en]
| {{No}}
| USB ID: 056a:0062
|}

== Mice ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Connector
! Works on Pandora
! Additional comments
|-
| Apple Mouse (M5769)
| USB
| {{No}}
| Seems to disable USB port, reboot afterwards required
|-
| Apple Mouse with Scroll Ball (A1152)
| USB
| {{No}}
| Seems to disable USB port, reboot afterwards required
|}

= Connectors, adapters, and hubs =

This section is intended as a general guide. Items in this section are standard USB accessories, so drivers are not required. Compatibility with Pandora is assumed. Please note that any external product links are provided for reference only, and are not an endorsement.

== OTG (On The Go) Adapters ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Generic adapter
| {{No}}
| [http://shop.ebay.com/?_from=R40&_trksid=p3907.m38.l1313&_nkw=usb+otg+host+cable&_sacat=See-All-Categories Find on eBay] [http://www.amazon.co.uk/s/ref=nb_ss_ce?url=search-alias%3Delectronics&field-keywords=OTG+Cable+Adapter&x=3&y=23 Find on Amazon] These links are not 100% accurate. Check for `mini-a`, and on eBay, the price is higher by about $8.
|-
| Nokia USB OTG adapter
| {{Yes}}
| [http://www.electronicproductonline.com/catalog/product_info.php?cPath=35_67&products_id=2043 Electronic Product Online]
|}

== Compact USB Hubs ==

{|class="wikitable sortable" border="1" cellpadding="1" cellspacing="0" style="font-size: 90%; border:1px solid gray; border-collapse: collapse; text-align: center; width: 100%;"
|- style="background: #ececec"
! Device
! Works on Pandora
! Additional comments
|-
| Griffin SmartShare USB [http://www.griffintechnology.com/products/smartshare-usb]
| {{No}}
|
|-
| Belkin F5U415 4 Port USB 2.0 Swivel Hub [http://catalog.belkin.com/IWCatProductPage.process?Product_Id=377085]
| {{No}}
| Comes with an optional power adapter.
|-
| Belkin F5U701 USB 2.0 7 Port Mobile Hub [http://www.belkin.com/IWCatProductPage.process?Product_Id=369788]
| {{Yes}}
| Tested by pabloh. Comes with an optional power adapter.
|-
| ID 0e8f:0016 GreenAsia Inc.
| {{No}}
| Tested by tsh. Labeled as high speed. Bought from ebay.
|-
|Trust 4 port netbook hub ID 05e3:0608
| {{Yes}}
| Tested by tsh. Bought from [http://www.amazon.co.uk/gp/product/B0025X16AS Amazon].
|-
| High Speed 4 Port Mini USB 2.0 Hub for Laptop PC (non powered)
| {{Yes}}
| Octopus-style small cheap unpowered USB hub. Bought from [http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&item=270538502843 ebay]
|-
| Keeptech USB 2.0 Hub (7 Ports) with Power Adapter, KT-UH703 [http://www.keeptech.com/books_show.php?id=144]
| {{Yes}}
| Tested by [[User:Esn|Esn]]. Works powered or unpowered.
|-
| Logitech Premium 4-Port USB Hub [http://www.logitech.com/en-in/notebook-products/usb-hubs/devices/3048]
| {{Yes}}
|
|-
| LUPO 7-port USB 2.0 Hub (cheap octopus type which can be powered as there is dc socket)
| {{Partial|Yes. {{HideableNotes|Can use a power supply but wasn't tested with one.}}}}
| Tested by kilowatt. Bought from [http://www.amazon.co.uk/gp/product/B003BVDABG/ref=oss_product from amazon uk]
|-
| LogiLink USB 2.0 Hub 4-Port UA0086 [http://www.logilink.eu/showproduct/UA0086.htm]
| {{Yes}}
| Tested by Jones. Comes with an optional power adapter.
|-
| Rosewill RHB-220 4-port USB 2.0 Hub
| {{Yes}}
| Tested by Tyrant1919. Unpowered. Bought from [http://www.newegg.com/Product/Product.aspx?Item=N82E16817182168 Newegg].
|-
| SLEEK HUB USB 2.0 4 Ports Hub
| {{Yes}}
| Comes with an ac adapter, but can be used without. USB 1 devices works perfectly.
|}

[[Category:USB]]
[[Category:List]]